Filters

0 conveyors found

Vinar – Roller conveyor

Non-powered

The gravity roller conveyor, named the Vinar, transports either manually or over a gradient via gravity. Simplified design and gravity rollers make it easy to use for every non-driven application. The Vinar conveyors offer shock-free transport by applying small rollers (ø20mm) and are ideally suited for light to medium loads.

50 kg/m
5 °
Configure nowMore info

Virol 24V – Roller conveyor

24V Poly-V powered

The powered Virol 24V roller conveyors are ideally suited for both light and medium loads up to 50 kg/m. Mostly used to buffer or separate product carriers via easy zero pressure accumulation divided in sections. Transmission is provided by poly-V belts for an efficient, quiet and maintenance free operation compared to the round belt.

50 kg/m
60 m/min
Configure nowMore info

Virol 24V – Roller conveyor curve

24V poly-V powered

The Virol 24V Curve is ideally suited for both light and medium loads, up to 50 kg/m. The curve changes the direction of the transported products, guaranteeing a continuous throughput. The drivetrain is powered by looped through Poly-V belts, providing a silent and efficient operation compared to the traditional round belts. The Poly-V belts are firmly and safely mounted inside the frame, completely clear of the transported loads. That is what makes this roller conveyor perfect for crates with stacking ridges.

50 kg/m
60 m/min
Configure nowMore info

Virol 400V– Roller conveyor

230V/400V poly-V powered

The Virol 400V powered roller conveyors are ideally suited for both middle and heavier loads up to 150 kg/m. The Virol can be used to buffer or separate product carriers via easy zero pressure accumulation divided in sections. Transmission is provided by poly-V belts for an efficient, quiet and maintenance free operation compared to the round belts.

75 kg/m
60 m/min
Configure nowMore info

Virol 400V – Roller conveyor curve

230V/400V poly-V powered

The Virol 400V Curve is ideally suited for both light and medium loads, up to 75 kg/m. The curve changes the direction of the transported products, guaranteeing a continuous throughput. The drivetrain is powered by a 230/400V motor with looped-through Poly-V belts, providing a silent and efficient operation compared to the traditional round belts. The Poly-V belts are firmly and safely mounted inside the frame, completely clear of the transported loads. That is what makes this roller conveyor perfect for crates with stacking ridges.

75 kg/m
60 m/min
Configure nowMore info

Viroc – Roller conveyor

230V/400V chain powered

The chain driven Viroc 400V roller conveyor is ideally suited for heavier loads up to 150 kg/m. The transmission belts are solid and mounted within the frame and do not form an obstacle for the cargo. This makes this roller conveyor especially suited for crates with stacking ridges.

150 kg/m
30 m/min
Configure nowMore info

Viroc – Roller conveyor curve

230V/400V chain powered

The Viroc 400V Curve is ideally suited for heavier loads, up to 150
kg/m. The unique design of the Viroc Curve allows it to be used instead of turning units. The curve changes the direction of the transported products, guaranteeing a continuous throughput. The drivetrain is powered by a 230/400V motor with looped-through chains, providing a rigid, powerful and effective operation. The chains are firmly and safely mounted inside the frame, completely clear of the transported loads. That is what makes this roller conveyor perfect for crates with stacking ridges.

150 kg/m
30 m/min
Configure nowMore info

Vikra – Chain conveyor

230V/400V powered

The Vikra two-track chain conveyors are similar to the Viko chain conveyor series, but for crates and dollies. The chain conveyor consists of two chain tracks, which can effectively transport individual or stacks of crates up to 500 kg per meter. Crates can be transported both in length and width thanks to the correctly positioned chain tracks underneath.

500 kg/m
30 m/min
3 °
Configure nowMore info

Viko – Chain conveyor

230V/400V powered

The Viko two- or three-track chain conveyors are perfectly suited for pallets from medium to heavy weights up to 1500 kg per meter. Pallets and crates are able to move multi directional. The Viko has two variations – the first is a two chain combination – the second is a three chain combination providing extra support to the middle of a load.

1500 kg/m
20 m/min
3 °
Configure nowMore info

Viflex – Modular belt conveyor

230V/400V powered

The Viflex stainless steel conveyors series have been designed for flexibility and easy-cleaning purposes. Consisting of an modular belt and an robust, but open frame. A modular belt makes it possible to combine straight and curve modules, all in one conveyor! The Viflex conveyor belt series is made from stainless steel which makes it perfect for wet, humid or moist surroundings.

50 kg/m
30 m/min
Configure nowMore info

Vikon – Belt Conveyor

230V/400V powered

Our line of the Vikon industrial belt conveyors have been designed to transport smaller and lightweight products. The Vikon product line series is available in two strong variations, where in dry environments steel support is used and in humid environments plastic sliding supports are used to offer a frictionless application of belt conveyor systems. Both applications come with positive V-belt tracking.

50 kg/m
60 m/min
15 °
Configure nowMore info

Vitra – Belt conveyor

230V/400V powered

The Vitra industrial belt conveyor is suitable for a wide variety of product carriers, from small to big and from light to heavy weights. It comes in two types of heavy duty configurations – supported by steel, for a solid surface for medium to heavy loads, or supported by roller bed allowing for heavier loads and longer lengths. Both with positive V-belt tracking.

150 kg/m
60 m/min
20 °
Configure nowMore info

Vipal – Pallet roller conveyor

Non-powered

The non-driven pallet roller conveyors are designed to handle various loads of pallets and pallet boxes up to 1500kgs. The pallets and pallet boxes are transported over a gradient via gravity, long side leaning. The simplified design and gravity rollers makes it easy to use for every non-driven application. The Vipal conveyors can be easily combined with all our other conveyor series to set-up your ideal conveyor solution.

1500 kg/m
5 °
Request quoteMore info

Virapal – Pallet roller conveyor

230V/400V chain powered

The Virapal pallet conveyor is manufactured to handle various loads of pallets and pallet boxes up to 1500kgs. Manufactured in three varying widths, this conveyor solution can easily handle standard dimensions of loads while the choice of pitch depends on the weight and stability of the loads being transported. A chain transmission is used to drive the rollers at a maximum speed of 20 m/min.

1500 kg/m
20 m/min
Request quoteMore info

Virol – Wheel diverter

24V powered for Virol roller conveyors

The roller conveyor wheel diverter is ideally suited for the sorting of products. By turning the wheels in the diverter, products can be transported forward or split off at an angle. The position of the product remains unchanged. The wheel diverter operates through a pneumatic cylinder. Our intelligent design enables the handling of boxes as well as crates, with either a flat underside or one with stackable ridging.

25 kg/m
60 m/min
35 °
Request quoteMore info

Virol – Transfer unit

24V powered for Virol roller conveyors

The roller conveyor transfer unit is suitable for the sorting of products. The snares between the rollers can move up and down, which allows products to be transported forward or at a 90˚ angle both ways. This also changes the positioning of the product on the conveyor. The transfer unit operates with a pneumatic cylinder.

25 kg/m
60 m/min
Request quoteMore info

Virol – Stopper

24V powered for Virol roller conveyors

The pneumatic stopping module is suitable for Virol 24V and Virol 400V roller conveyors, and is mounted on the underside of the frame. The pneumatic stopper can halt incoming products by raising a barrier between the rollers. The stopping module is commonly used in combination with a pneumatic transfer or pusher unit. The stopper module accurately and reliably positions the products, before they are redirected to a different line.

50 kg/m
5000 Units p/h
Request quoteMore info

Virol – Rodless pusher

24V powered for Virol roller conveyors

The pneumatic pusher is perfect for pushing light to medium weight products (up to 50kg) at a 90˚ angle, to a different productline. The pneumatic pusher is compatible with the Virol 24V and Virol 400V rolley conveyors. The pusher is mounted on the underside of the frame, with the teeth situated inbetween the rollers. The pusher module can be combined with a stopping module to manoever the products into their optimal position. Because the module is mounted underneith the roller conveyor, the risk of getting stuck is minimized. The DGC cylinder is a lot more compact than the standard cylinder, allowing the module to be fitted in limited workspaces.

50 kg/m
1200 Units p/h
Request quoteMore info

Virol 24V – Merge

24V powered for Virol roller conveyors

The Merge for the Virol 24V merges two transport lines into one, maintaining the throughput of products. The merge module is suitable for both lighter and heavier loads up to 50 kg/m. The drivetrain is powered by looped through Poly-V belts, providing a silent and efficient operation compared to the traditional round belts. The Poly-V belts are firmly and safely mounted inside the frame, completely clear of the transported loads. That is what makes this roller conveyor perfect for crates with stacking ridges.

50 kg/m
60 m/min
Configure nowMore info

Virol 400V – Merge

230V/400V powered for Virol 400V roller conveyors

The merge module for the Virol 400V merges two transport lines into one, maintaining the throughput of products. The merge module is suitable for both lighter and heavier loads up to 75 kg/m. The drivetrain is powered by a 230/400V motor with looped through Poly-V belts, providing a silent and efficient operation compared to the traditional round belts. The Poly-V belts are firmly and safely mounted inside the frame, completely clear of the transported loads. That is what makes this roller conveyor perfect for crates with stacking ridges.

75 kg/m
60 m/min
Configure nowMore info

Viroc – Merge

230V/400V chain powered for Viroc roller conveyors

The Merge for the Viroc 400V merges two transport lines into one, maintaining the throughput of products. The merge module is suitable for heavier loads up to 150 kg/m. The drivetrain is powered by a 230/400V motor with looped through chains, providing a rigid and powerful operation. The chains are firmly and safely mounted inside the frame, completely clear of the transported loads. That is what makes this roller conveyor perfect for crates with stacking ridges.

150 kg/m
60 m/min
Request quoteMore info

Virapal – Transfer unit

230V/400V powered for pallet roller conveyors

The Virapal transfer unit consists of 2 components: The pallet roller conveyors and the chain conveyors. This pallet roller conveyor module is perfect for sorting pallets. The roller conveyor can move pallets up or down, which enables the transfer of pallets to the chain conveyor or take them off the chain conveyor. This allows for a smooth input or output.

1500 kg/m
20 m/min
Request quoteMore info

Virapal – Turning unit

230V/400V powered for pallet roller conveyors

The Virapal Turning unit is perfect for turning pallets in order to move them in a different direction. This Turning unit is designed in such a way that the pallet roller conveyor can turn up to 270°, which allows it to handle input and output at all angles. The module is equipped with a strong and robust ball slewing ring and is turned using a gear-rack setup.

1500 kg/m
20 m/min
Request quoteMore info

Viko – Turning unit

230V/400V powered for chain conveyors

The Viko pallet turning unit for turning pallets in order to move them in a different direction. This Turning unit is designed in such a way that the pallet can turn up to 270°, which allows it to handle input and output at all angles. The module is equipped with a strong and robust ball slewing ring and is turned using a gear-rack setup.

1500 kg/m
19 m/min
Request quoteMore info

Photocell mounting kit

The photocell sensor is used to detect products on the conveyor belt. This photocell sensor is delivered including a steel mounting kit that fits all our conveyors. The photocell sensor can be mounted to the frame or the guiding rails.

Request quote

Cable channels

These steel cable channels can be easily mounted to the legframes of all our conveyors. The cable channels are delivered including swivels and supports, and are available in the following sizes:

  • 70 mm x 60 mm x 3000 mm
  • 120 mm x 60 mm x 3000 mm
  • 200 mm x 60 mm x 3000 mm
Request quote

?

Looking for something else? Contact us!

If you have any requests in the meantime, feel free to contact us.

Contact us!

E: info@myconveyor.com

T: +31 (0)78 673 9898